* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
Enviament estàndard gratuït en comandes superiors a 9,9 $
Política de devolució
Els articles de devolució s'acceptaran dins dels 40 dies quan sigui la data de recepció dels béns. Els articles personalitzats no es poden retornar ni canviar. Els articles comprats amb una targeta de regal electrònica només es poden canviar; no s'apliquen reemborsaments.
Regal gratuït
Benvingut a Roymall, el teu lloc web professional per a la compra de regals de botiga de departaments premium. Valorem i apreciem molt el teu suport, i volem expressar el nostre agraïment afegint un toc addicional d'emoció a les teves compres. Quan compres amb nosaltres, no només gaudiràs de productes d'alta qualitat que milloren el teu estil de vida, sinó que també rebràs un regal exclusiu gratuït amb cada comanda que facis.Preparat per explorar la nostra col·lecció i trobar els teus regals perfectes? Navega per la nostra selecció d'articles de botiga de departaments premium, fes la teva comanda i espera amb il·lusió l'arribada del teu regal gratuït juntament amb la teva compra.
Política d'enviament
Treballarem dur per lliurar-te els articles després de rebre les teves comandes i assegurar-nos que arribin de manera segura. Els detalls de lliurament es proporcionaran al teu correu electrònic de confirmació.En la majoria dels casos, les comandes es processen en 2 dies. En circumstàncies especials, es retardarà de la següent manera: Quan facis una comanda dissabte, diumenge o dies festius, es retardarà 2 dies..Normalment, necessita 5-7 dies laborables (de dilluns a divendres) sense veure's afectat per retards de vol o altres factors ambientals..Com que el nostre servei d'enviament és mundial, els temps de lliurament dependran de la teva ubicació, de manera que pot necessitar uns quants dies i si us plau, espera amb paciència si estàs en districtes o països remots.
1. Política de devolució i canvi
Només acceptem articles comprats a roymall.com. Si compres als nostres distribuïdors locals o altres minoristes, no pots retornar-los per la nostra banda.Els articles de venda final o regals gratuïts no són acceptables per a una devolució.Per ser elegible per a una devolució, el teu article ha d'estar sense usar i en les mateixes condicions en què el vas rebre. També ha d'estar en l'embalatge original.Després de rebre les instruccions de devolució de nosaltres, si us plau, empaqueta els teus articles retornats i deixa el teu paquet a l'oficina de correus local o un altre missatger. Processarem el teu article de devolució o canvi dins de 3-5 dies laborables després de rebre'l. El reemborsament es processarà i es creditarà automàticament al teu mètode de pagament original.No es poden acceptar devolucions o canvis si el producte s'ha produït a mida, incloent mida personalitzada, color personalitzat o impresió personalitzada.Necessites més ajuda, si us plau, contacta amb nosaltres. service@roymall.com o Whatsapp: +8619359849471
2.Política de reemborsament
Rebràs un reemborsament complet o un crèdit de botiga del 100% després que rebem el paquet retornat i el comprovem. El reemborsament es processarà i es creditarà automàticament al teu mètode de pagament original.Si us plau, tingues en compte que els costos d'enviament i qualsevol dret o taxa no són reemborsables. Els costos addicionals d'enviament no són reemborsables una vegada s'ha enviat el paquet. Ets responsable de pagar aquestes taxes i no podem renunciar-hi o reemborsar-les, fins i tot si la comanda es retorna a nosaltres. Un cop rebem i confirmem el teu article retornat, t'enviarem un correu electrònic per notificar-te que hem rebut el teu article retornat. També t'informarem de l'aprovació o rebuig del teu reemborsament.Si tens algun problema pel que fa al procés de reemborsament, si us plau, contacta amb nosaltres. service@roymall.com o Whatsapp: +8619359849471
MAX7219 Microcontroller 4-in-1 Display Dot Matrix Module For
Specifications:
A single module can drive a 8x8 dot matrix common cathode Working voltage: 5V Module size: 12.8 x 3.2 x 1.3 cm (L*W*H) With 64 fixing screw holes, hole diameter: 3mm Module with input and output interfaces, support for cascading multiple modules
Wiring:
1. The left side of the module is the input port, and the right is the output port. 2. Control of a single module, the input port only need to receive CPU. 3. The more a module cascade and input end of the first module is connected with the CPU and input end of the input end of the output end is connected to the second module, output terminal of the second module connected with the three modules, and so on. For example: 51 SCM VCC→5V GND→GND DIN→P2.2 CS →P2.1 CLK→P2.0
Package included:
1 x MAX7219 Dot Matrix Module 1 x 5pin Dupont Cable
I first tried the dotMatrix on the Arduino with the Sprite and Matrix libraries. I got funny results because the column adressing is reversed.
Therefore I switched to the MD_MAX72xx libraries. Make sure to change the define in the MD_MAX72xx. h file to read:
#define USE_FC16_HW 1
I used the MD_Keyswitch library found at https://github.com/MajicDesigns/MD_KeySwitch
and the MD_MAX72xx library found at https://github.com/MajicDesigns/MD_MAX72XX
Then I pulled the source at https://github.com/MajicDesigns/MD_MAX72XX/blob/master/examples/MD_MAX72xx_ScrollChart/MD_MAX72xx_ScrollChart.ino
With that you should be able to get it to work.
If you use pins that are not-SPI standard, make sure to activate the call to MD_MAX72XX with four parameters, and comment out the one with two parameters.
I first tried the dotMatrix on the Arduino with the Sprite and Matrix libraries. I got funny results because the column adressing is reversed.
Therefore I switched to the MD_MAX72xx libraries. Make sure to change the define in the MD_MAX72xx. h file to read:
#define USE_FC16_HW 1
I used the MD_Keyswitch library found at https://github.com/MajicDesigns/MD_KeySwitch
and the MD_MAX72xx library found at https://github.com/MajicDesigns/MD_MAX72XX
Then I pulled the source at https://github.com/MajicDesigns/MD_MAX72XX/blob/master/examples/MD_MAX72xx_ScrollChart/MD_MAX72xx_ScrollChart.ino
With that you should be able to get it to work.
If you use pins that are not-SPI standard, make sure to activate the call to MD_MAX72XX with four parameters, and comment out the one with two parameters.
I first tried the dotMatrix on the Arduino with the Sprite and Matrix libraries. I got funny results because the column adressing is reversed.
Therefore I switched to the MD_MAX72xx libraries. Make sure to change the define in the MD_MAX72xx. h file to read:
#define USE_FC16_HW 1
I used the MD_Keyswitch library found at https://github.com/MajicDesigns/MD_KeySwitch
and the MD_MAX72xx library found at https://github.com/MajicDesigns/MD_MAX72XX
Then I pulled the source at https://github.com/MajicDesigns/MD_MAX72XX/blob/master/examples/MD_MAX72xx_ScrollChart/MD_MAX72xx_ScrollChart.ino
With that you should be able to get it to work.
If you use pins that are not-SPI standard, make sure to activate the call to MD_MAX72XX with four parameters, and comment out the one with two parameters.
very good product and good price.
If you don't know how that work i found one good tutorial.
https://www.makerguides.com/max7219-led-dot-matrix-display-arduino-tutorial/
If you try the programs and see that they do not work with the first one.
Try changing the names of the pins you will use and reload the program on Arduino.
e.g.
CS_PIN 10
DATAPIN 11
CLK_PIN 13
very good product and good price.
If you don't know how that work i found one good tutorial.
https://www.makerguides.com/max7219-led-dot-matrix-display-arduino-tutorial/
If you try the programs and see that they do not work with the first one.
Try changing the names of the pins you will use and reload the program on Arduino.
e.g.
CS_PIN 10
DATAPIN 11
CLK_PIN 13
very good product and good price.
If you don't know how that work i found one good tutorial.
https://www.makerguides.com/max7219-led-dot-matrix-display-arduino-tutorial/
If you try the programs and see that they do not work with the first one.
Try changing the names of the pins you will use and reload the program on Arduino.
e.g.
CS_PIN 10
DATAPIN 11
CLK_PIN 13
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
@***** look it up in the MAX7219 datasheet. Another cool thing about these ICs is the need for just one resistor to limit the current for all segments x digits (64 per IC) to retain the same brightness whether only one LED is on or all 64. IIRC there's a chart there with recommended resistor values depending on number of LEDs. I could probably lift one of the 8x8 matrices off and see what resistor value they've used, but the datasheet should give you an idea. Assume you need an external power supply though. They're not super bright but it's still 256 LEDs.
@***** look it up in the MAX7219 datasheet. Another cool thing about these ICs is the need for just one resistor to limit the current for all segments x digits (64 per IC) to retain the same brightness whether only one LED is on or all 64. IIRC there's a chart there with recommended resistor values depending on number of LEDs. I could probably lift one of the 8x8 matrices off and see what resistor value they've used, but the datasheet should give you an idea. Assume you need an external power supply though. They're not super bright but it's still 256 LEDs.
Answered by BG344213471 on 31/08/2022Helpful (0)
0
Q:
Can I daisy chain several of these? By just connecting output of the first with input of the next?
Can I daisy chain several of these? By just connecting output of the first with input of the next?
Depending on how much you want to daisy chain you should inject supply power every 2 or 3 modules else the voltage drop and the current running through the modules gets to high
Depending on how much you want to daisy chain you should inject supply power every 2 or 3 modules else the voltage drop and the current running through the modules gets to high
Depends on what you mean by "users manual". The datasheet for the MAX7219 controller is excellent and all you need to know to program these things. If you want plug and play there are multiple libraries to choose from.
Depends on what you mean by "users manual". The datasheet for the MAX7219 controller is excellent and all you need to know to program these things. If you want plug and play there are multiple libraries to choose from.
Answered by BG344213471 on 31/08/2022Helpful (0)
0
Q:
I can choose the color of the matrix or only send it in a single color?
I can choose the color of the matrix or only send it in a single color?
Use the MD_MAX72XX library. With the device set to: #define HARDWARE_TYPE MD_MAX72XX::ICSTATION_HW. If you don't change that line in the examples, the characters are mirrored. Use the MD_Parola library (also) for even more functions. All sketches have to include that line, the default is Parola hardware.
Use the MD_MAX72XX library. With the device set to: #define HARDWARE_TYPE MD_MAX72XX::ICSTATION_HW. If you don't change that line in the examples, the characters are mirrored. Use the MD_Parola library (also) for even more functions. All sketches have to include that line, the default is Parola hardware.
Answered by Strider on 28/11/2018Helpful (0)
Ask a Question
1.You can contact the customer service. for any question regarding the product.
2.Ask the question in English to get answer faster.